Page 18 - ROMET Electronic Larynx
P. 18

Romet Genesis  User Manual



             BATTERY


            Check the battery level when the device is first turned ON. If the battery
            is sufficiently charged the LED will light GREEN. If the battery is LOW the
            LED will light RED. While you are speaking the LED will shine the
            appropriate color depending upon the level the battery is currently
            charged. Once plugged in, the Red LED on the button panel will “breathe”
            (slowly light up to full brightness then slowly dim until fully off). When the
            device is fully charged, the LED on the button panel will turn Solid
            Green. The device will charge no matter what position the main power
            switch is in. Note: The device will not work while charging. This is a safety
            measure that protects the device from any damage.






            Charging the Battery



            Charging the device is required when the LED on the panel             turns red
            after the activator button has been pushed ( meaning the battery level
            is below 100% ). When the activator tone button is pressed or when the
            device is initially turned on and red LED flashes (meaning the battery is
            less   than    100%),    the   battery   needs    to  be   charged    prior   to
            extensive    speaking. Charging is carried out with the charger included
            in the box. Plug the provided micro-USB cable into the Micro-USB port on
            the bottom of the device, then plug the opposite end of the cable into the
            electrical wall socket. Please use care when inserting the USB micro-cable
            into the receptable located on the bottom of the unit. Gently insert the
            micro-USB into the socket to activate the charging function. Do not try to
            force the micro-USB into the receptacle. The red LED on the button panel
            will then “breathe” (slowly light up to full brightness then slowly dim until
            fully off). When the device is fully charged, the LED on the button panel
            will turn green and stay lit. Note: The device will not operate while
            charging. This is a safety measure that protects the device from
            any electrical damage. The device will charge no matter what position the
            main power switch is in on or off.









                                                                                                      6
   13   14   15   16   17   18   19   20   21   22   23