Page 5 - ROMET Electronic Larynx
P. 5
Romet Clarity User Manual
GETTING STARTED
3.Basic use
This device is partially charged by the manufacturer.You need to fully
charge the device before starting usage. Charging the device is
performed when the LED on the panel turns red when the activator
tone button is pressed. Charging is carried out with the charger
included in the box. Plug the provided USB cable into the USB port
on the bottom of the device, the other end of the cable connects to
the charger and the charger plugs into the electrical wall socket.
The green and red LEDs on the bottom of the device will turn on.
When the red light goes out, thedevice is fully charged . Note: The
device will not work while charging. This is a safety measure that
protects the device from any damage.
4. After charging the device, it must be turned on to operate
To activate the unit, slide the switch on the bottom of the unit from
OFF to ON . The multicolor LED lights up green briefly. Press the
Activator Tone button to begin speaking and change the volume as
you desire.
5. Finding the sweet spot
A sweet spot is a place where you feel the sound from the electro
larynx transmits through your neck tissue and your oral cavity with
the most clarity. The easiest way to find your sweet spot is to place
the electro larynx on your neck in different positions and actuate the
sound. What you are looking for is the place on your neck, which
transmits sound the best. While looking for a sweet spot, it is crucial
that you press it firmly against your neck tissue, so the sound
transmits through your tissue and out your oral cavity. Take your time
finding yoursweet spot this is the most crucial part of learning how to
use an electrolarynx. Finding just the right neck spot will set you up for
success.
4